List of Diagnostic Test result types.

Line State

Available on FTTB and FTTN services.

Field Explanation

actual_cpe_vectoring_type

The Actual CPE Vectoring Type.

actual_psd_downstream

Actual PSD Downstream in dBm/Hz.

actual_psd_upstream

Actual PSD Upstream in dBm/Hz.

actual_rtx_mode_downstream

RTX Actual Mode Downstream.

actual_rtx_mode_upstream

RTX Actual Mode Upstream.

band_0_attenuation_avg_upstream

Band 0 Attenuation Average Upstream in dB.

band_0_loop_attenuation_avg_upstream

Band 0 Loop Attenuation Average Upstream in dB.

band_1_attenuation_avg_downstream

Band 1 Attenuation Average downstream in dB.

band_1_attenuation_avg_upstream

Band 1 Attenuation Average upstream in dB.

band_1_loop_attenuation_avg_downstream

Band 1 Loop Attenuation Average Downstream in dB.

band_1_loop_attenuation_avg_upstream

Band 1 Loop Attenuation Average Upstream in dB.

band_2_attenuation_avg_downstream

Band 2 Attenuation Average Downstream in dB.

band_2_attenuation_avg_upstream

Band 2 Attenuation Average Upstream in dB.

band_2_loop_attenuation_avg_downstream

Band 2 Loop Attenuation Average Downstream in dB.

band_2_loop_attenuation_avg_upstream

Band 2 Loop Attenuation Average Upstream in dB.

band_3_attenuation_avg_downstream

Band 3 Attenuation Average Downstream in dB.

band_3_loop_attenuation_avg_downstream

Band 3 Loop Attenuation Average Downstream in dB.

detected_mac_addresses

Detected Mac Addresses.

dsl_mode

Technology Type.

electrical_length

The length of electrical conductor in dB.

estimated_delt_distance

The estimated length of copper run in meters.

fallback_state

Indicates whether a fallback profile is in use.

modem_name

Registered Modem name.

modem_vendor_id

Modem Vendor Id.

noise_margin_avg_downstream

Noise Margin Average Downstream in dB.

noise_margin_avg_upstream

Noise Margin Average Upstream in dB.

operational_status

Indicates operational status of the port.

output_power_downstream

Output Power Downstream in dBm.

output_power_upstream

Output Power Upstream in dBm.

physical_profile

The current profile applied to the port.

relative_capacity_occupation_downstream

Relative Capacity Occupation Downstream in percentage.

relative_capacity_occupation_upstream

Relative Capacity Occupation Upstream in percentage.

rtx_actual_expected_throughput_downstream

'Real World' expected downstream throughput rate in kbps.

rtx_actual_expected_throughput_upstream

'Real World' expected upstream throughput rate in kbps.

rtx_actual_net_data_rate_downstream

Technical maximum downstream throughput rate in kbps.

rtx_actual_net_data_rate_upstream

Technical maximum upstream throughput rate in kbps.

rtx_attainable_expected_throughput_downstream

'Real World' expected downstream throughput rate(kbps), if device syncs perfectly to port.

rtx_attainable_expected_throughput_upstream

'Real World' expected upstream throughput rate(kbps), if device syncs perfectly to port.

rtx_attainable_net_data_rate_downstream

Technical maximum downstream throughput rate with a perfect sync in kbps.

rtx_attainable_net_data_rate_upstream

Technical maximum upstream throughput rate with a perfect sync in kbps.

serial_number

The Serial Number.

service_stability

The stability statuses of the service.

  • STABLE

  • RISKY

  • UNSTABLE

  • UNKNOWN

supported_cpe_vectoring_types

The supported CPE Vectoring types.

system_vendor_id

The system vendor Id.

system_vendor_model

The system vendor model.

user_traffic_downstream

The User Traffic Downstream in octets.

user_traffic_upstream

The User Traffic Upstream in octets.

vectoring_status

Vectoring Status.

nbn_test_id

The NBN identifier of the diagnostic test.

result

The NBN status of the diagnostic test.

start

Start time of the diagnostic test.

end

End time of the diagnostic test.

notes

Often a symptom of an unexpected technical issue within NBN.
Example payload of diagnostic test for the type Line State
{
  "id": 1,
  "type": "line-state",
  "status": "completed",
  "requestedAt": "2020-11-12T12:14:11Z",
  "active": false,
  "result": {
    "actual_cpe_vectoring_type": "g.vector capable",
    "actual_psd_downstream": -56.4,
    "actual_psd_upstream": -60.6,
    "actual_rtx_mode_downstream": "In Use",
    "actual_rtx_mode_upstream": "In Use",
    "band_0_attenuation_avg_upstream": 5.3,
    "band_0_loop_attenuation_avg_upstream": 5.3,
    "band_1_attenuation_avg_downstream": 18.7,
    "band_1_attenuation_avg_upstream": 27,
    "band_1_loop_attenuation_avg_downstream": 15.6,
    "band_1_loop_attenuation_avg_upstream": 26.5,
    "band_2_attenuation_avg_downstream": 34.8,
    "band_2_attenuation_avg_upstream": 40.1,
    "band_2_loop_attenuation_avg_downstream": 34,
    "band_2_loop_attenuation_avg_upstream": 40.7,
    "band_3_attenuation_avg_downstream": 56.7,
    "band_3_loop_attenuation_avg_downstream": 52.7,
    "detected_mac_addresses": [
      "7C:5A:1C:82:A3:F7"
    ],
    "dsl_mode": "VDSL2",
    "electrical_length": "12.5",
    "estimated_delt_distance": 612,
    "fallback_state": "Not Active",
    "modem_name": "SFP (META * META)",
    "modem_vendor_id": "B000000000000000",
    "noise_margin_avg_downstream": 6.7,
    "noise_margin_avg_upstream": 6.5,
    "operational_status": "Up",
    "output_power_downstream": 14.1,
    "output_power_upstream": 6.3,
    "physical_profile": "100/40 Standard 6dB (Co-Existence)",
    "relative_capacity_occupation_downstream": 97,
    "relative_capacity_occupation_upstream": 97,
    "rtx_actual_expected_throughput_downstream": 82356,
    "rtx_actual_expected_throughput_upstream": 30462,
    "rtx_actual_net_data_rate_downstream": 83333,
    "rtx_actual_net_data_rate_upstream": 30773,
    "rtx_attainable_expected_throughput_downstream": 88928,
    "rtx_attainable_expected_throughput_upstream": 29489,
    "rtx_attainable_net_data_rate_downstream": 89836,
    "rtx_attainable_net_data_rate_upstream": 29790,
    "serial_number": "00011D00111100000000000000000000",
    "service_stability": "STABLE",
    "supported_cpe_vectoring_types": [
      "legacy g.vector capable"
    ],
    "system_vendor_id": "B500000000000000",
    "system_vendor_model": "11111110500000000000201010202020",
    "user_traffic_downstream": 4134613,
    "user_traffic_upstream": 4860991,
    "vectoring_status": "Enabled",
    "nbn_test_id": "WRI000000000000",
    "result": "Passed",
    "start": "2020-11-12 12:14:13",
    "end": "2020-11-12 12:14:24"
  },
  "completedOn": "2020-11-12T12:14:26Z",
  "serviceId": 11111
}

DPU Port Status

Available on FTTC services.

Field Explanation

operational_state

The operational state on the DPU.

sync_state

xDSL sync status of the port.

access_line_rate

The line sync speed of the port.

port_number

The port number.

mac_address_end_user_gateway

End user gateway mac address.

reserve_power_state

Powered state.

nbn_test_id

The NBN identifier of the diagnostic test.

result

The NBN status of the diagnostic test.

start

Start time of the diagnostic test.

end

End time of the diagnostic test.

notes

Often a symptom of an unexpected technical issue within NBN.
Example payload of diagnostic test for the type DPU Port Status
{
  "id": 1,
  "type": "dpu-port-status",
  "status": "completed",
  "requestedAt": "2020-11-13T05:41:35Z",
  "active": false,
  "result": {
    "access_line_rate": "98.02/44.34 Mbps",
    "operational_state": "Up",
    "port_number": 3,
    "reserve_power_state": "Powered",
    "sync_state": "In Sync",
    "nbn_test_id": "WRI000000000000",
    "result": "Passed",
    "start": "2020-11-13 05:41:38",
    "end": "2020-11-13 05:42:16"
  },
  "serviceId": 11111,
  "completedOn": "2020-11-13T05:42:20Z"
}

DPU Status

Available on FTTC services.

Field Explanation

operational_state

The operational state of the port.

c_vlan_id

CVlan Id of AVC.

s_vlan_id

SVlan Id of AVC.

nbn_test_id

The NBN identifier of the diagnostic test.

result

The NBN status of the diagnostic test.

start

Start time of the diagnostic test.

end

End time of the diagnostic test.

notes

Often a symptom of an unexpected technical issue within NBN.
Example payload of diagnostic test for the type DPU Status
{
  "id": 123,
  "type": "dpu-status",
  "status": "completed",
  "requestedAt": "2020-12-17T04:52:16Z",
  "active": false,
  "result": {
    "c_vlan_id": "111",
    "operational_state": "Up",
    "s_vlan_id": "11",
    "nbn_test_id": "WRI000000000000",
    "result": "Passed",
    "start": "2020-12-17 04:52:18",
    "end": "2020-12-17 04:52:27"
  },
  "serviceId": 11111,
  "completedOn": "2020-12-17T04:52:30Z"
}

NCD Port Reset

Available on FTTC services.

Field Explanation

nbn_test_id

The NBN identifier of the diagnostic test.

result

The NBN status of the diagnostic test.

start

Start time of the diagnostic test.

end

End time of the diagnostic test.

notes

Often a symptom of an unexpected technical issue within NBN.
Example payload of diagnostic test for the type NCD Port Reset
{
  "id": 346,
  "type": "ncd-port-reset",
  "status": "cancelled",
  "requestedAt": "2020-12-17T05:59:37Z",
  "active": false,
  "result": {
    "notes": {
      "CN252": "Unable to run NCD_Port_Reset. Please try again later."
    },
    "nbn_test_id": "WRI000000000000",
    "start": "2020-12-17 05:59:38",
    "end": "2020-12-17 05:59:42"
  },
  "serviceId": 11111,
  "cancelledOn": "2020-12-17T05:59:44Z"
}

NCD Reset

Available on FTTC services.

Field Explanation

nbn_test_id

The NBN identifier of the diagnostic test.

result

The NBN status of the diagnostic test.

start

Start time of the diagnostic test.

end

End time of the diagnostic test.

notes

Often a symptom of an unexpected technical issue within NBN.
Example payload of diagnostic test for the type NCD Reset
{
  "id": 258,
  "type": "ncd-reset",
  "status": "completed",
  "requestedAt": "2020-12-12T02:50:56Z",
  "active": false,
  "result": {
    "nbn_test_id": "WRI000000000000",
    "result": "Passed",
    "start": "2020-12-12 02:50:57",
    "end": "2020-12-12 02:54:28"
  },
  "serviceId": 11111,
  "completedOn": "2020-12-12T02:54:31Z"
}

NTD Reset

Available on HFC services.

Field Explanation

nbn_test_id

The NBN identifier of the diagnostic test.

result

The NBN status of the diagnostic test.

start

Start time of the diagnostic test.

end

End time of the diagnostic test.

notes

Often a symptom of an unexpected technical issue within NBN.
Example payload of diagnostic test for the type NTD Reset
{
  "id": 7,
  "type": "ntd-reset",
  "status": "completed",
  "requestedAt": "2020-11-12T12:15:44Z",
  "active": false,
  "result": {
    "nbn_test_id": "WRI000000000000",
    "result": "Passed",
    "start": "2020-11-12 12:15:46",
    "end": "2020-11-12 12:15:52"
  },
  "serviceId": 11111,
  "completedOn": "2020-11-12T12:15:55Z"
}

NTD Status

Available on FTTP and HFC services.

FTTP

Field Explanation

battery_fail_status

Backup battery failure status.

battery_install_date

Backup battery installed date.

battery_missing_status

Battery backup missing status.

c_vlan_id

CVlan Id of the AVC.

operational_state

Indicates operational state of the port.

power_type

The Power Type.

reporting_state

The Reporting State.

s_vlan_id

SVlan Id of the AVC.

serial_number

NTD Serial Number.

result

The NBN status of the diagnostic test.

nbn_test_id

The NBN identifier of the diagnostic test.

start

Start time of the diagnostic test.

end

End time of the diagnostic test.

notes

Often a symptom of an unexpected technical issue within NBN.
Example payload of diagnostic test for the type NTD Status (FTTP)
{
  "id": 11,
  "type": "ntd-status",
  "status": "completed",
  "requestedAt": "2020-11-12T12:16:28Z",
  "active": false,
  "result": {
    "battery_fail_status": "No",
    "battery_missing_status": "No",
    "c_vlan_id": "11",
    "operational_state": "Up",
    "power_type": "Backup",
    "reporting_state": "No Defect",
    "s_vlan_id": "11",
    "serial_number": "AL111FFF21111",
    "nbn_test_id": "WR0000000000000",
    "result": "Passed",
    "start": "2020-11-12 12:16:30",
    "end": "2020-11-12 12:16:40"
  },
  "serviceId": 11111,
  "completedOn": "2020-11-12T12:16:42Z"
}

HFC

Field Explanation

flaps

The number of reconnections.

mac_address

MAC Address of the port.

last_flap_time

The last connection period.

link_state

Link State.

link_type

Link Type.

uptime

The Uptime.

nbn_test_id

The NBN identifier of the diagnostic test.

result

The NBN status of the diagnostic test.

start

Start time of the diagnostic test.

end

End time of the diagnostic test.

notes

Often a symptom of an unexpected technical issue within NBN.
Example payload of diagnostic test for the type NTD Status (HFC)
{
  "id": 182,
  "type": "ntd-status",
  "status": "completed",
  "requestedAt": "2020-11-30T13:00:40Z",
  "active": false,
  "result": {
    "flaps": "2",
    "mac_address": "AA:00:FC:8F:2A:5D",
    "last_flap_time": "2020-11-30 12:39:44",
    "link_state": "Up",
    "link_type": "ETHERNET",
    "uptime": "1111",
    "nbn_test_id": "WRI000000000000",
    "result": "Passed",
    "start": "2020-11-30 13:00:43",
    "end": "2020-11-30 13:00:57"
  },
  "serviceId": 11111,
  "completedOn": "2020-11-30T13:00:58Z"
}

Port Reset

Available on FTTB, FTTN and FTTP services.

Field Explanation

nbn_test_id

The NBN identifier of the diagnostic test.

result

The NBN status of the diagnostic test.

start

Start time of the diagnostic test.

end

End time of the diagnostic test.

notes

Often a symptom of an unexpected technical issue within NBN.
Example payload of diagnostic test for the type Port Reset
{
  "id": 51,
  "type": "port-reset",
  "status": "completed",
  "requestedAt": "2020-11-13T04:52:54Z",
  "active": false,
  "result": {
    "nbn_test_id": "WRI0000000000000",
    "result": "Passed",
    "start": "2020-11-13 04:52:57",
    "end": "2020-11-13 04:53:01"
  },
  "serviceId": 11111,
  "completedOn": "2020-11-13T04:53:05Z"
}

NCD-UNI-D Status

Available on FTTC services.

Field Explanation

operational_state

Indicates operational state of the port.

ncd_uni_d_port_configuration

NCD-UNI-D Port configuration.

ncd_uni_d_port_speed_duplex

NCD-UNI-D Port speed duplex.

nbn_test_id

The NBN identifier of the diagnostic test.

result

The NBN status of the diagnostic test.

start

Start time of the diagnostic test.

end

End time of the diagnostic test.

notes

Often a symptom of an unexpected technical issue within NBN.
Example payload of diagnostic test for the type NCD-UNI-D Status
{
  "id": 378,
  "type": "ncd-uni-d-status",
  "status": "completed",
  "requestedAt": "2021-01-05T08:48:52Z",
  "active": false,
  "result": {
    "operational_state": "Up",
    "ncd_uni_d_port_configuration": "Auto / Auto",
    "ncd_uni_d_port_speed_duplex": "1000 Mbps / Full",
    "nbn_test_id": "WRI000000000000",
    "result": "Passed",
    "start": "2021-01-05 08:48:53",
    "end": "2021-01-05 08:49:17"
  },
  "serviceId": 11111,
  "completedOn": "2021-01-05T08:49:19Z"
}

NTD-UNI-D Status

Available on FTTP services.

Field Explanation

config_status

The config status.

link_state

The Link State.

mac_address

Mac Address of the port.

ntd_uni_d_state

The status of NTD-UNI-D port.

operational_state

Indicates operational state of the port.

port_number

The port number.

nbn_test_id

The NBN identifier of the diagnostic test.

result

The NBN status of the diagnostic test.

start

Start time of the diagnostic test.

end

End time of the diagnostic test.

notes

Often a symptom of an unexpected technical issue within NBN.
Example payload of diagnostic test for the type NTD-UNI-D Status
{
  "id": 7,
  "type": "ntd-uni-d-status",
  "status": "completed",
  "requestedAt": "2020-11-12T12:15:44Z",
  "active": false,
  "result": {
    "config_status": "GigE (full duplex)",
    "link_state": "Carrier detected",
    "mac_address": "74:4D:28:98:3C:BA",
    "ntd_uni_d_state": "No Defect",
    "operational_state": "Up",
    "port_number": 2,
    "nbn_test_id": "WRI000000000000",
    "result": "Passed",
    "start": "2020-11-12 12:15:46",
    "end": "2020-11-12 12:15:52"
  },
  "serviceId": 11111,
  "completedOn": "2020-11-12T12:15:55Z"
}